Vegetable And Fruit Dicing Machine
Description
The vegetable and fruit dicing machine is designed on the basis of advanced foreign models and combined with the urgent needs of users. According to the same type of cutting machine, the outer diameter of the propeller impeller is increased, the effective outlet width of the cutting material is widened, and the speed is increased by nearly 3 times. The propeller and shell, cutter, knife holder, knife holder assembly, etc. are all made of stainless steel, with reasonable design, a wide variety of cuts, good quality, continuous operation, suitable for uninterrupted production, easy cleaning and maintenance.Vegetable And Fruit Dicing Machine is suitable for cutting carrots, potatoes, onions, strawberries, eggplants, peaches, pears, pineapples, cucumbers, various fruits, green and red peppers and other potato bulbs in slices, strips and cubes in the food industry.
Technical parameters
1. The outer diameter of the propeller: Φ350mm
2. Motor: Y112M-4 4KW
3. Output: 1000-3000kg/h
4. Weight: ≈350Kg
5. Dimensions: 1100 x1100x1600mm
Cutting specifications
Use the required cutting knife shaft and adjust the thickness of the gasket to cut various pieces, strips or D shapes.
1. Unload the disc cutter shaft, feeder shaft, and strip cutter shaft to cut 1.6-11mm slices.
2. The strip knife shaft can be removed, and it can be combined with the six specifications of the round knife shaft (feeder shaft) 3, 4, 5, 6, 8, and 10, and can be sliced, threaded, and cube-shaped.
3. Equipped with all slicing devices, it can cut 3×3×3, 4×4×4, 6×6×6, 8×8×8, 10×10×10mm D-shaped.
Can also be cut: 3×3×(1.6-11) 6×6×(1.6-11)
4×4×(1.6-11) 8×8×(1.6-11)
5×5×(1.6-11) 10×10×(1.6-11)
According to the combination of tools, it can cut square and rectangular bars with different thicknesses
Bar length can be 15, 20, 25, 30 or free length
Attachment: Normally, 5×5 and 10×10 sets of tools are supplied randomly, and additional tools need to be ordered separately.
Instructions and precautions
1. The knives installed in this machine contain sharp cutting edges, which must be sharpened after being dull.
2. When servicing the Vegetable And Fruit Dicing Machine, you must first disconnect and lock the power supply, and only after visually confirming that the equipment has completely stopped, can you remove the cover and the protective plate, otherwise it may cause serious injury.
3. Pay attention to daily cleaning to prevent excessive accumulation of product on the cutting parts and affect the cutting efficiency. When cleaning, do not use abrasive materials, metal tools, iron brushes and sandpaper to clean any parts, and scrape with wooden or plastic tools when necessary.
4. When starting the equipment, you must use the synchronous belt wheel to ensure that there is no foreign matter in the slicing device before starting the power.
5. The Vegetable And Fruit Dicing Machine must be lubricated after every 4 hours of operation.
We also have another bulb type vegetable cutting machine can cutting the fruit and vegetable to dices,for your reference!!
评论
发表评论